Delivery in the Republic of Belarus if ordered from 2,000 BYN with VAT for FREE!
Delivery to Moscow with if ordered from 64,000 RUB with VAT FREE!
Check conditions for other countries with the manager!
Write in Jivosite chat (bottom right corner) the article of goods and we will consult you!
Technical characteristics correspond to those of MMZ production. It is used instead of MMZ crankshafts:
This type of crankshaft is designed for CUMMINS ISF 2.8 (53129T) engines (ISF series engines), which are installed on all major GAZelle modifications – GAZ-3302 on-board platform (also 330202, 33023, 330232, 33027 and 330273), GAZ all-metal van -2705 (and 27057) and a passenger minibus GAZ-3221 (also 32212, 32213, 32217, 322173, 322132 and 322123). Since 2013, Cummins diesels have been installed on new GAZelle-Next, GAZelle-Business, GAZelle Valdai trucks, as well as Foton Aumark cars and buses (PAZ 3237-05 / 4230-05).
A part requires replacement when chips, cracks, and other signs of wear appear on its surface.
The crankshaft GM1360 is made of cast iron. It is a durable, wear-resistant, full support mechanism. The main necks in the production are quenched by high-frequency currents.
- five-bearing, rotating in main bearings. .
- Several coaxial root necks supported by bearings and one or more elbows. To connect the connecting rod, the knee includes two cheeks and one neck.
- to balance the crankshaft, counterweights are often added to the cheeks during operation, since the axles of the connecting rod necks are shifted relative to the axis of rotation of the shaft.
- from axial displacement, the crankshaft is fixed by the shoulders of the upper liner of the fourth main bearing.
- on the front nose of the crankshaft, a hexagon is made for driving the oil pump, and on the rear toe of the crankshaft, the gear of the fuel pump and camshaft drive is made.
|Dimensions||60 × 20 × 20 cm|
You can buy from us GM1360 crankshaft with the following characteristics:
|OEM NO:||5264231 (5264230, 5443207, 5443206, 5340179, 4980384, 5282791, 534959, 5258266, 5282791)|
|Use||Двигатель CUMMINS ISF 2.8 (53129T) (двигателей серии ISF)|
|Width; Length; Height; Weight||0,29m, 0,76m, 0,31m; 24 kg.|
* The manufacturing competence of GENMOT CRANKSHAFT INDUSTRY staff allows us to manufacture products using various technologies, such as:
– casting method (own casting shop)
– casting method using ADI technology (Austempered Ductile Iron). This is an advanced method, which all leading manufacturers of automotive components of the European level are switching to. ADI injection moldings are widely used for the manufacture of wear-resistant industrial parts. Due to the hardening characteristics of the matrix, the products have an exceptional combination of wear resistance and toughness, while they have a lower weight and are easier to process
– forging method